- 3-Way diverter valves should be used when 3 shower fixtures are desired
- German made Fluehs brass thermostatic cartridge for optimal temperature control and anti-scald protection
- Heavy forged brass eliminates pin-hole leak risks; ensures durability and reliability
- Temperature button stops the handle rotation at 100 degrees F (38 degrees C) for anti-scald protection. If water above this temperature is desired, simply press the button and turn the handle counterclockwise.
- Max temperature stop valves for added safety
- Integral stop valves are built in for easy maintenance.
- a fluid mud guard is suppled to protect the valve from dirt and debris during construction. Each unique fluid mud guard is equipped with a built in bubble level making for an easy and lever installation.
- 5.5. gpm @ 60 psig
- CUPC, Watersense and CalGreen approved.
- 2-Way diverter valves should be used when 2 shower fixtures are desired, (such as shower and Hand held shower, or fixed shower and rain shower heads).
- German made Fluehs brass thermostatic cartridge for optimal temperature control and anti-scald protection. Temperature button stops the handle rotation at 100 degrees F (38 degrees C) for anti-scald protection. If water above this temperature is desired, simply press the button and turn the handle counterclockwise. This system gives ultimate temperature control convenience and protection.
- Heavy forged brass eliminates pin-hole leak risks; ensure durability and reliability
- Max temperature stop valves for added safety
- Integral stop valves are built in for easy maintenance. (Integral stops allow you to turn the water supply off only to the shower, so if making adjustments to your shower system it will not effect the water supply to the rest of your home).
- a fluid mud guard is suppled to protect the valve from dirt and debris during construction. Each unique fluid mud guard is equipped with a built in bubble level making for an easy and lever installation. (If the valve isn't level on installation, this means that the valve trim also would be crooked, making the final look of the installation less than satisfactory).fluid believe in providing extras like the bubble level to ensure ultimate client satisfaction.
- 5.5. gpm @ 60 psig
- CUPC, Watersense and CalGreen approved.
- Note: The fluid F1003B is being replaced by the F1023B Valve.
- Heavy forged brass pressure balancing valve, built to last
- Available in solder, PEX or PEX-W (1960 Expansion PeX), standard or with sharing option.*
- Pressure balancing ensures anti scald protection. If the pressure of the incoming cold water suddenly changes due to a toilet flushing or an appliance turning on, this pressure balancing valve will automatically reduce the incoming hot water too, ensuring a comfortable, safe shower experience.
- Features high quality ceramic disc cartridge.
- Integral stop valves for easy maintenance.
- Valve features an integral bubble level, so level installation is easy
- Non-sharing valve is compliant with Cal Green requirements
- Works with a wide variety of fluid shower trims, sold separately.
- Valves are forged from solid brass, not cast, using the strongest materials and manufacturing process available.
- Available for solder, PEX or PEX-W (1960-Expansion PEX), with or without sharing
- Pressure balancing ensures anti scald protection. If the pressure of the incoming cold water suddenly changes due to a toilet flushing or an appliance turning on, this pressure balancing valve will automatically reduce the incoming hot water too, ensuring a comfortable, safe shower experience.
- Features a high quality, ceramic cartridge.
- Integral stop valves are included for easy maintenance.
- Mud Guard on Valve features min/max inset from finished wall indicator and an integral bubble level, so level installation is easy
- Non-sharing valves are compliant with Cal Green requirements
- Works with a wide variety of fluid shower trims, sold separately.
- This valve is ADA compliant and universally designed, ensuring it can be used by everyone.
- Made of forged heavy brass.
- Pressure balancing with built-in 2-way diverter ceramic cartridge that ensures anti-scald operation with lifelong trouble free service.
- Built-in anti-back flow device helps prevent cross flow.
- Single lever handle operation allows for diverting and temperature control.
- Integral stop valves for easy maintenance.
- Three inlet connection options: 1/2” CxC soldering & 1/2” NPT thread or PEX or PEX-W
- Adjustable installation depth from 2-3/8” (60mm) to 3-1/8” (80mm)
- This valve enables back-to-back installation.
- A Bubble level is provided for easy and level installation.
- A Mud guard is also provided to protect the trim finish while installing.
- This 2-way valve works differently than our 2-handle F1012B.
- A wide selection of trim kits are sold separately.
- Crafted from heavy brass, for strength and reliability
- High quality German made Fluhs ceramic cartridge
- Yaletown features razor thin dual handles and design-centric style and balance
- Yaletown faucets include the fluid swivel Eco-Care aerator, allowing you to redirect the water flow to avoid splash back, no matter where you install them.
- Also included is the Quick Clean pop up, featuring an internal basket that can be pulled up and removed. This basket not only catches hair, keeping your drainline clean, but also prevent small items like rings and bracelets from falling down the drain.
- The flow rate is 1.0 GPM or 3.8 LPM at 60 psi
- Extra long supply lines are included for easy installation
- An aerator service key is included with the faucet for easy maintenance and cleaning.
- Pressure balancing ensures anti-scald protection.
- Features a square 8" rain shower head on an 16" shower arm and a square hand shower wand with wall mounted holder and 60" hose.
- Includes a maximum temperature limit stop for added safety for your household.
- Requires a fluid F1012B pressure balancing valve, sold separately.
- Shower kits feature metal construction for durability and reliability.
- The fluid Pressure balancing volume control ceramic cartridge keeps you and your family safe from scalding.
- Available with standard, PEX or PEX cold expansion 1960 valves.
- Maximum temperature limit stop for added safety.
- Integral stop valves for easy maintenance.
- Features a pull up curved diverting tub spout, valve trim, 6" shower head and 8" standard shower arm.
- Requires the fluid F1001B pressure balancing valve, sold separately and available in solder, PEX and PEX-W
- Brass construction for durability and reliability
- European Kerox ceramic cartridge ensures life-long trouble free service
- Single lever handle operation allows both volume and temperature control
- Our own Eco-Care swivel aerator (1.2 gpm-4.6 lpm) allows you to direct the flow of your water to eliminate splash back, no matter where you install it
- 1 1/2" faucet hole size for drilling
- The system features a 2 handle, 2-way diverting system. The smaller diverter handle turns to supply water to either the shower or the hand shower. (Not a pull out diverter; turn from side to side to divert water)
- Trim kit includes the 8" rain shower head, the Yaletown style handle, a round cover plate, and a round hand shower on a holder.
- Safety features include pressure balancing scald control and an optional maximum temperature limit stop that can set a max. temperature to protect even the most vulnerable users
- System includes integral stop check valves, allowing you to turn water off only to the shower for easy maintenance.
- This system requires the fluid F1012B pressure balancing valve, that is sold separately and available in solder, PEX and PEX-W.
- Shower kits feature metal construction for durability and reliability.
- The fluid Pressure balancing volume control ceramic cartridge keeps you and your family safe from scalding.
- Available with standard, PEX or PEX cold expansion 1960 valves.
- Max temperature limit stop for added safety.
- Integral stop valves for easy maintenance.
- Features a pull up diverting tub spout, 4" shower head and 8" standard shower arm.
- Requires the fluid F1001B pressure balancing Valve, sold separately.
- Metal construction for durability and reliability
- Swivel spout with 360 degree or 140 degree rotation with supplied stop
- Pull down and retractable magnetic system
- Kerox ceramic cartridge ensures life long, trouble free service
- Single handle operation allows both volume and temperature control
- Quick and easy installation with quick hose connector
- Dual function spray head with spray and aerated flow
- Limited to flow rate of 1.8 gpm (6.8 lpm) at 60 psi
- Maximum deck thickness 1 3/4” (45 mm) with spacer and 2 1/2” (63 mm) without spacer
- 1 1/2” faucet hole size for drilling is recommended
- 8” deck plate for 3-hole installation is available and sold separately
- 2 Years limited manufacture warranty
- ADA Compliant
Your Account
Shop
Legal
SHOWROOM ADDRESS: 4300 Steeles Ave West, Unit #3. Woodbridge, ON L4L 4C2
OPEN TO PUBLIC Monday-Friday 10:00 AM – 5:30 PM Saturdays 10:00 AM – 5:00 PM
© Copyright 2025 SANITERICA | All Rights Reserved | Web Design by SEYVANCO