- Urinal Round Cord Ring, EPDM
- For Use With Geberit Duofix Carrier (111.625.00.1)
- Urinal PVC Waste Fitting Expansion Coupler Outlet Pipe
- Outlet Pipe Ø1.97” (Ø50 mm)
- For Use With Geberit Duofix Carrier (111.625.00.1)
- Urinal Waste Fitting Outlet Bend
- With Ø1.97” (Ø50 mm) Outlet Seal
- 1 x 90° bend with Ø2.48"/Ø1.97" (Ø63 / Ø50 mm) Dimensions
- For Use With Geberit Duofix Carrier (111.625.00.1)
- Urinal Seal For Outlet Bend Pipe
- Ø1.97” (Ø50 mm) Outlet
- For Use With Geberit Duofix Carrier (111.625.00.1)
- Wall-Hung Toilet Bowl Installation Kit
- With 1" (2.5cm) Offset and Mounting Hardware
- With Socket For Ø3.50" (Ø90mm) Push Fit Piping
- Ø55mm Supply Inlet
- Matte Chrome Cover Caps
- For Use With Geberit DuoFix Carriers (111.255, 111.335, 111.728)
- PE Urinal Syphon Trap With Vertical Outlet and Seal
- Ø1.96" (Ø50mm) Outlet
- For Use With Geberit DuoFix Urinal Carrier System (111.625)
- PE Urinal Syphon Trap With Horizonal Outlet and Seal
- Ø1.96" (Ø50mm) Outlet
- For Use With Geberit DuoFix Urinal Carrier System (111.625)
- PP Connector Set With Bend For Floor-Mount Toilets
- 1 x 90° Bend With Socket For Ø4.375" Push Fit Piping
- Ø3.82"-4.21" Male Connection and Expansion to Ø4.375" Outlet
- Includes Mounting Hardware
- For Use With Floor-Mount, Back Outlet Toilet
- Back-to-Back Vertical Waste Fitting Connection, HDPE
- 2 x 90° Bend With Socket For Ø3.50" Push Fit Piping
- With 45° Offset and Expansion to Ø4.375" Outlet
- For 10.75" Minimum Walls Only
- For Use With Geberit DuoFix Carriers For Wall Hung Toilets
- Back-to-Back Horizontal Waste Fitting Connection, HDPE
- 2 x 90° Bend With Socket For Ø3.50" Push Fit Piping
- With 45° Offset and Expansion to Ø4.375" Outlet
- For 10.75" Minimum Walls Only
- For Use With Geberit DuoFix Carriers For Wall Hung Toilets
- Cast Iron Waste Fitting Outlet Bend
- 1 x 90° Bend With Socket For Ø3.50" Push Fit Piping and 3" Cast Iron Pipe Outlet
- 1 x 2" NPTF (National Pipe Taper Fuel) Heel Outlet
- For Use With Geberit DuoFix Carriers For Wall Hung Toilets
- Offset Waste Fitting Connector, HDPE
- For Right-Hand Horizontal Drain Connections (As Viewed From Sitting Position)
- 1 x 90° Bend With Socket For Ø3.50" Push Fit Piping, With 45° Offset and Ø3.50" Outlet, For 5.5" Minimum Walls Only
- For Use With Geberit DuoFix Carriers For Wall Hung Toilets




















