- Rough only
- ½" inlet female NPT
- Test cap
- Can be installed 360°
- Canadian Made
- Limited lifetime warranty
- For wall mount TXX360 lavatory faucet trim
- Solid brass construction
- Test cap
- Flow rate of 6.3 GPM at 60 PSI
- Three ½" outlets male NPT or sweat
- Service valves
- TXX45XX or TXX47XX trim required to complete
- Canadian Made
- Limited lifetime warranty
- Solid brass construction
- Test cap
- Flow rate of 6.3 GPM at 60 PSI
- Two ½" outlets male NPT or sweat
- Service valves
- TXX23XX or TXX44XX trim required to complete
- Canadian Made
- Limited lifetime warranty
- Drain sold separately
- Distance between handle installation holes: 4"
- Purchase RH360 rough-in valve separately
- Flow rate of 1.2 GPM at 60 PSI
- Solid brass construction
- Quick Connect system simplifies installation
- Number of holes required for installation: 2
- Watersense certified
- Limited lifetime warranty
- Height: 2-1/4"
- Spout Reach: 6-3/8"
- Flow Rate: 1.2 gallons-per-minute
- Faucet Centers: 4"
- Faucet Hole Size: 1-7/8"
- Faucet Holes: 2
- Full brass construction
- Coordinates with products from the Parabola line
- Includes hand shower - 1 function hand shower handy for rinsing down the tub or just rinsing off after a bath
- Single hole installation
- Smooth single handle operation
- 1 handle included with faucet
- Rough in valve RHFS not included - Purchase separately
- Integrated diverter included – located on the tub spout
- Covered under Riobel's limited lifetime warranty
- Height: 35-3/8" (bottom to top of faucet)
- Spout Height: 34-3/8"
- Spout Reach: 9-1/2"
- Flow Rate: 6 gallons-per-minute
- Hand Shower Flow Rate: 1.8 gallons-per-minute
- Hose Length: 59"
- Number of Faucet Holes: 1
- Faucet Hole Size: 2-1/2"
- Ceramic disc cartridge for durability and long-lasting performance
- Two jet "Boomerang" hand spray with integrated swivel that retracts seamlessly into the spout
- Swivel spout can rotate 360 degrees for greater sink accessibility
- Silent braided nylon hose reduces friction between pull-down hose and tap spout for quieter operation
- Number of holes required for fitting : 1
- Minimum operating pressure: 1 Bar
- Maximum operating pressure 5 Bar
- Flow rate of 6.2L/min
- Temperature range 10°C/34°F Min : 70°C/158°F
- Limited lifetime warranty
- Ceramic disc cartridge for durability and long-lasting performance
- Two jet "Boomerang" hand spray with integrated swivel that retracts seamlessly into the spout
- Dual-spray functionality with ability to toggle between stream and spray settings
- Swivel spout can rotate 360 degrees for greater sink accessibility
- Number of holes required for fitting : 1
- Minimum operating pressure: 1 Bar
- Maximum operating pressure 5 Bar
- Flow rate of 6.2L/min
- Temperature range 10°C/34°F Min : 70°C/158°F
- Limited lifetime warranty
- Rough only
- Solid Brass Construction
- 1/2” inlet male NPT
- 3-hole deck or ledge mount
- Canadian Made
- Limited lifetime warranty
- Constructed of brass
- Brass is highly resistant to corrosion and an excellent choice to withstand high temperatures
- Includes hand shower - 1 function hand shower handy for rinsing down the tub or just rinsing off after a bath
- Widespread deck mounted installation - 2 hole faucet with 8" to 16" faucet centers
- Smooth single handle operation
- Rough in valve not included - Purchase RH66 Separately
- Integrated diverter included – located on the tub spout
- Complies with ADA standards
- Covered under Riobel's limited lifetime warranty
- Height: 6-3/8" (bottom to top of faucet)
- Spout Height: 5-3/8" (deck to spout outlet)
- Spout Reach: 8"
- Flow Rate: 4.6 gallons-per-minute
- Hand Shower Flow Rate: 1.8 gallons-per-minute
- Hose Length: 59"
- Faucet Centers: 8" to 16"
- Faucet Hole Size: 2"
- Pressure balance deck mount tub filler provides consistent comfort with no variation in water temperature
- Includes a single-function, anti-calcium handshower at 1.8 GPM at 60 PSI
- Deck mounted tub fillers offer installation ease for freestanding bathtubs with adequate decks, as well as undermount and drop-in bathtubs
- 1/2" inlet male NPT
- All hardware for installation is included
- Flow rate of 6.0 GPM at 60 PSI to quickly fill your tub
- Rough valve sold separately: order RHTB, RHTB-SPEX or RHTB-EX
- Solid brass construction delivers the utmost in beauty, durability and long-lasting performance
- Limited lifetime warranty
- Full brass construction
- Includes hand shower - handy for rinsing down the tub or just rinsing off after a bath
- Widespread wall mounted installation - 3 hole faucet with 12" faucet centers
- Smooth single handle operation
- 1 handle included with faucet
- Integrated diverter included – located on the tub spout
- Rough-in valve sold separately:
- Order RH21 wall mount tub filler rough-in valve
- Limited lifetime warranty
- Height: 4-1/8" (bottom to top of faucet)
- Spout Height: 4-1/8" (deck to spout outlet)
- Spout Reach: 8-3/4" (center of faucet body to center of spout outlet horizontally)
- Flow Rate: 5 gallons-per-minute
- Hand Shower Flow Rate: 1.8 gallons-per-minute
- Includes a single-function, anti-calcium handshower at 1.8 GPM at 60 PSI
- Single hole floor mounted installation
- Integrated diverter to easily divert water from tub filler to hand shower
- All hardware for installation is included
- Flow rate of 6.0 GPM at 60 PSI to quickly fill your tub
- Rough valve sold separately: order RHFS, RHFS-EX or RHFS-SPEX rough valve (for concrete floor installation order RHBX, RHFS-EX OR RHFS-SPEX)
- Purchase with confidence knowing that this product is backed by limited lifetime warranty
- Solid brass construction delivers the utmost in beauty, durability and long-lasting performance
Your Account
Shop
Legal
SHOWROOM ADDRESS: 4300 Steeles Ave West, Unit #3. Woodbridge, ON L4L 4C2
OPEN TO PUBLIC Monday-Friday 10:00 AM – 5:30 PM Saturdays 10:00 AM – 5:00 PM
© Copyright 2025 SANITERICA | All Rights Reserved | Web Design by SEYVANCO