- Outside Dim.: 21” x 15” x 6 ½”
- Inside Dim.: 18” x 12”
- Bowl Depth: 6 ½”
- Drain Opening: 2 ¾”
- 304 Stainless Steel
- Classic Rectangular Bowl
- 18 Gauge
- Off-set Strainer
- ASME A 112.19.3
- CSA B45.4
- Limited Lifetime Warranty
- DIAMOND Seal Technology: a lifetime of reliable performance
- Metal drain pop-up assembly in matching finish included
- Everything you need is together in one convenient box, including integrated InnoFlex PEX supply lines
- 3-hole 4-16" installation
- Metal pop-up
- ADA Compliant
- WaterSense labeled faucet uses at least 20% less water than the industry standard without compromising performance
- Backed by Delta Faucet's Lifetime Limited Warranty
- Handcrafted
- 304 stainless steel 16 gauge
- 18/10 chrome nickel content
- Bowl corner radius of 15mm
- Undermount clips
- Stainless steel strainers
- Bottom Grids, Colander and Dish Rack is included
- 10″ Deep
- 9″ Deep apron
- Outside: 29″ x 19″ x 10″
- Inside: 27″ x 16″ x 10″
- Minimum cabinet inside size: 29″
- Handcrafted
- 316 stainless steel 16 gauge
- 18/10 chrome nickel
- Bowl corner radius of 15mm
- Brushed finish
- Undermount clips
- Stainless steel strainer
- Bottom Grid, Dish Rack, and a Colander is included
- 10″ Deep
- Outside: 33″ x 18″ x 10″
- Inside: 31″ x 16″ x 10″
- Minimum cabinet size: 36″
- Swivel range 150°
- Aerated spray, handshower spray
- Lockable shower spray, spray return automatically through handle closing
- MagFit magnetic handspray holder
- Deck-mounted
- Maximum flow rate: 1.75 GPM
- Ceramic cartridge
- G ⅜ hose connections
- Integrated backflow prevention
- Extension length up to 19 5/8”
- Pull-Out Kitchen Faucet, connection hoses, fixation set, service key, installation manual
- Works with RO systems, filtered water systems, chillers, or as a cold water tap
- Spout swings 360°
- Single lever handle design
- Air gap included with 1/4 in. tube for RO system and 3/8 in. tube for drain
- Mounting wrench to assist in tightening mounting nut securely
- Integrated supply tube with 3/8 in. compression fitting
- DIAMOND Seal Technology is less hassle to install and helps your faucet perform like new for life, reducing leak points and lasting twice as long as the industry standard
- Everything you need is together in one convenient box, including integrated InnoFlex PEX supply lines
- Recommend minimum 2-1/2 in. clearance to backsplash
- Single hole installation
- Spout Height 9-1/2"
- Spout Length 5-1/16"
- Deck to Outlet 6-1/16"
- ADA Compliant
- Backed by Delta Faucet's Lifetime Limited Warranty
- Handcrafted
- 316 stainless steel 16 gauge
- 18/10 chrome nickel content
- Bowl corner radius of 15mm
- Brushed finish
- Undermount clips
- Template
- Stainless steel strainers
- Complete sink accessories Included
- Top to lip 5/8″ lower
- 1″ Wide central lowered 3″
- Lip 1/2
- 10″ Deep
- Outside: 36 1/2 x 19 1/2 x 10″
- Inside: 34″ x 17″ x 10″
- Bowl size: 16 1/2″ x 16″ x 10″
- Bowl size: 16 1/2″ x 16″ x 10″
- Minimum cabinet size 39″
- Two hole installation
- Wall-Mounted for an upscale look and more streamlined vanity space
- Trim kit only, must purchase rough-in kit R3510-WL separately
- WaterSense labeled faucet uses at least 20% less water than the industry standard without compromising performance
- Rigid spout
- ADA Compliant
- Backed by Delta Faucet's Lifetime Limited Warranty
- Diamond Seal Technology is less hassle to install and helps your faucet perform like new for life, reducing leak points and lasting twice as long as the industry standard
- Everything you need is together in one convenient box, including integrated InnoFlex PEX supply lines
- Fits single hole installations
- Optional deck plate (RP102033PC) sold separately for 3-hole installations
- Metal push pop-up drain assembly in matching finish (included) is ADA compliant and simple to install, operate and clean
- Optional red/blue temperature indicator ring included
- ADA compliant
- WaterSense labeled faucet uses at least 20% less water than the industry standard without compromising performance
- High-arc spout swivels 360 degrees
- 3/8-inch compression fittings
- Backed by Delta Faucet's Lifetime Limited Warranty
- Delta Instant Hot Faucets provide near boiling water, perfect for cleaning, cooking and more
- Coordinates beautifully with various Delta Kitchen Faucets
- Engineered to function with HWT300-F2000S, HWT-300, or HWT300-F3000S InSinkErator tank models
- Tank and filter must be purchased separately and are not available from Delta Faucet Company
- Fits single-hole installations
- Accommodates up to 3-inch maximum deck thickness
- Spring-loaded, self-closing handle
- Spout swivels 360 degrees
- Solid brass construction
- Insulated body and spout to reduce heat transfer to faucet
- Spring-loaded ceramic disc valve cartridge
- Integrated InnoFlex PEX cold supply line with 3/8-inch compression fitting included
- ADA compliant
- Backed by Delta Faucet's Lifetime Limited Warranty
- 304 stainless steel
- 18 gauge
- Side mirror finish
- Bottom satin finish
- Template
- Undermount clips
- Strainer
- 9” Deep
- Outside: 31 1/4″ x 18″ x 9″
- Inside: 29 1/4″ x 16″ x 9″
- Minimum cabinet size 34″
Your Account
Shop
Legal
SHOWROOM ADDRESS: 4300 Steeles Ave West, Unit #3. Woodbridge, ON L4L 4C2
OPEN TO PUBLIC Monday-Friday 10:00 AM – 5:30 PM Saturdays 10:00 AM – 5:00 PM
© Copyright 2026 SANITERICA | All Rights Reserved