Connections & Fittings

• Wall-Hung Toilet Bowl Installation Kit
• With 1″ (2.5cm) Offset and Mounting Hardware
• With Socket For Ø3.50″ (Ø90mm) Push Fit Piping
• Ø55mm Supply Inlet
• Matte Chrome Cover Caps
• For Use With Geberit DuoFix Carriers (111.255, 111.335, 111.728)

• Cast Iron Waste Fitting Outlet Bend
• 1 x 90° Bend With Socket For Ø3.50″ Push Fit Piping and 3″ Cast Iron Pipe Outlet
• 1 x 2″ NPTF (National Pipe Taper Fuel) Heel Outlet
• For Use With Geberit DuoFix Carriers For Wall Hung Toilets

0.5 m Stainless Steel Self Inspection Element Unit

Used with ACO Brickslot Drain Channels

• Closed front, elongated SoftClose toilet seat and cover
• Quick release hinge system for easy cleaning
• Slow closing seat and lid action reduces the chance of injury and unwanted noise
• Ultra sleek and slim design
• New design with more stable fit and reduced seat wobble
• Conceals TOTO WASHLET+ channels in TOTO T40 WASHLET+ bowls
• Solid high-impact resin plastic with stainless steel hinge plate covers
• Included: SoftClose seat and mounting hardware

• 1 required for each touchless flush unit
• Transforming the mains voltage to low voltage 12 V DC
• Maximum distance 1.5m cable connection
• Protection degree – IP20
• Mains frequency – 50-60 Hz
• Nominal voltage – 85-240 V AC
• Dimensions – W77 x H77mm

• 1 required for each touchless flush unit
• Transforming the mains voltage to extra-low voltage 4.1 V DC
• Maximum distance 1.5m cable connection
• Protection degree – IP20
• Mains frequency – 50-60 Hz
• Nominal voltage – 85-240 V AC
• Dimensions – W77 x H77mm

• Back-to-Back Horizontal Waste Fitting Connection, HDPE
• 2 x 90° Bend With Socket For Ø3.50″ Push Fit Piping
• With 45° Offset and Expansion to Ø4.375″ Outlet
• For 10.75″ Minimum Walls Only
• For Use With Geberit DuoFix Carriers For Wall Hung Toilets

• Back-to-Back Vertical Waste Fitting Connection, HDPE
• 2 x 90° Bend With Socket For Ø3.50″ Push Fit Piping
• With 45° Offset and Expansion to Ø4.375″ Outlet
• For 10.75″ Minimum Walls Only
• For Use With Geberit DuoFix Carriers For Wall Hung Toilets

• Elongated seat with lid
• Covered under Duravit’s 1 year warranty
• Coordinates with products from the DuraStyle line seamlessly
• The soft-close lid forces a gentle descent, ensuring the lid will not slam shut
• Secure mounting assembly while keeping installation fast and easy
• All hardware required for installation is included

• Elongated seat with lid
• Covered under Duravit’s 1 year warranty
• Coordinates with products from the DuraStyle line seamlessly
• The soft-close lid forces a gentle descent, ensuring the lid will not slam shut
• Secure mounting assembly while keeping installation fast and easy
• All hardware required for installation is included

• Elongated seat with lid
• Covered under Duravit’s 1 year warranty
• Coordinates with products from the DuraStyle line seamlessly
• The soft-close lid forces a gentle descent, ensuring the lid will not slam shut
• Secure mounting assembly while keeping installation fast and easy
• All hardware required for installation is included
• Designed to complement the following Duravit toilets: 215701, 253709, 215609, 216001, 254209

TOTO THU859 Washlet – Wall Hung Adapter Kit for S7A & S7 Washlets and more.

• Elongated seat with lid
• Covered under Duravit’s 1 year warranty
• Coordinates with products from the DuraStyle line seamlessly
• The soft-close lid forces a gentle descent, ensuring the lid will not slam shut
• Secure mounting assembly while keeping installation fast and easy
• All hardware required for installation is included

• Water Supply Hose For Bidet Seats
• For Adding Bidet Seat to an Installed Carrier
• For Use With Geberit DuoFix Carriers (111.012, 111.255, 111.355, 111.728)

• PP Connector Set With Bend For Floor-Mount Toilets
• 1 x 90° Bend With Socket For Ø4.375″ Push Fit Piping
•  Ø3.82″-4.21″ Male Connection and Expansion to Ø4.375″ Outlet
• Includes Mounting Hardware
• For Use With Floor-Mount, Back Outlet Toilet

3 7/8″ Inch in Diameter

For Vertical Outlet

• Genuine TOTO outlet adapter for MS874S MS884 MS904 toilets
• Hardware to secure to tile or wood floor included
• Adapts select TOTO toilets to a 10 inch rough-in
• PVC body with rubber gasket
• Requires wax ring and floor drain bolts

For One-Piece and Two-Piece Toilets

3/8″ Outlet – Male Thread

1/2″ Female Thread

1/2″ Wall Connection

For One-Piece and Two-Piece Toilets

3/8″ Outlet – Male Thread

1/2″ Female Thread

1/2″ Wall Connection

• Genuine TOTO outlet adapter for Vespin® II Toilets
• Hardware to secure to tile or wood floor included
• Adapts select TOTO toilets to a 14 inch rough-in
• PVC body with rubber gasket
• Requires wax ring and floor drain bolts

• Genuine TOTO outlet adapter
• Hardware to secure to tile or wood floor included
• Adapts select TOTO toilets to a 14 inch rough-in
• PVC body with rubber gasket
• Requires wax ring and floor drain bolts

• Genuine TOTO outlet adapter
• Hardware to secure to tile or wood floor included
• Adapts select TOTO toilets to a 10 inch rough-in
• PVC body with rubber gasket
• Requires wax ring and floor drain bolts

• Genuine TOTO outlet adapter
• Hardware to secure to tile or wood floor included
• Adapts select TOTO toilets to a 14 inch rough-in
• PVC body with rubber gasket
• Requires wax ring and floor drain bolts

• Genuine TOTO outlet adapter
• Hardware to secure to tile or wood floor included
• Adapts select TOTO toilets to a 10 inch rough-in
• PVC body with rubber gasket
• Requires wax ring and floor drain bolts

• Offset Waste Fitting Connector, HDPE
• For Right-Hand Horizontal Drain Connections (As Viewed From Sitting Position)
• 1 x 90° Bend With Socket For Ø3.50″ Push Fit Piping, With 45° Offset and Ø3.50″ Outlet, For 5.5″ Minimum Walls Only
• For Use With Geberit DuoFix Carriers For Wall Hung Toilets

• Offset Waste Fitting Connector, HDPE
• For Left-Hand Horizontal Drain Connections (As Viewed From Sitting Position)
• 1 x 90° Bend With Socket For Ø3.50″ Push Fit Piping, With 45° Offset and Ø3.50″ Outlet, For 5.5″ Minimum Walls Only
• For Use With Geberit DuoFix Carriers For Wall Hung Toilets

• Accessories for Geberit Concealed Tank System Installation
• For Use With Geberit DuoFix 2×4 and 2×6 In-Wall Carrier Systems

• For Essence Single Flush Toilets
• Matte Black Finish
• Metal construction
• Limited lifetime warranty

• Conceals TOTO WASHLET+ channels in TOTO T40 WASHLET+ bowls
• Solid high-impact, high gloss polypropylene
• Slow closing seat and lid action reduces the chance of injury
• Closed front elongated shape
• Eliminates annoying toilet seat slam
• Rubber bumpers for more secure contact with the toilet bowl

• Compatible With Selected Toto Toilets: This kit is for use with the TOTO AP & TOTO EP toilet systems only
• Reliable and Long-lasting: Premium quality material used in this kit means no worries of having a toilet malfunction due to faulty parts. It’s built to last, giving you years of hassle-free performance.
• Easy Installation: The TOTO THU805 washlet connection kit makes installation of your S500e Washlet quick and easy! All the components you need to make the right connections are included in this kit.
• ½ Inch straight shutoff valve kit

• Slow Closing Seat and Lid action reduces the chance of injury
• Eliminates the toilet from Slamming
• Solid High-Impact, High Gloss Polypropylene
• For Use with Elongated Front Bowls
• Cotton White Finish

• The soft-close lid forces a gentle descent, ensuring the lid will never slam shut
• Easily removable with Quick-Release function
• Stainless Steel Hinges
• Round-front toilet seat with lid designed to complement a wide variety of round-front toilet designs
• Constructed from plastic for reliability
• Coordinates with products from the D-Neo line seamlessly
• Covered under Duravit’s 1-year warranty
• Height: 1-3/4″ (top to bottom)
• Depth (Projection): 17-3/8″ (back of the hinges to the front most part of the seat)
• Width: 14-3/4″ (left edge to the right edge of the inner opening of the seat)

• The soft-close lid forces a gentle descent, ensuring the lid will never slam shut
• Easily removable with Quick-Release function
• Stainless Steel Hinges
• Round-front toilet seat with lid designed to complement a wide variety of round-front toilet designs
• Constructed from plastic for reliability
• Coordinates with products from the D-Neo line seamlessly
• Covered under Duravit’s 1-year warranty
• Height: 1-3/4″ (top to bottom)
• Depth (Projection): 17-3/8″ (back of the hinges to the front most part of the seat)
• Width: 14-3/4″ (left edge to the right edge of the inner opening of the seat)

• Urinal Crossbar For Water Supply
• Yellow Pipe and Seal Not Included
• For Use With Geberit Duofix Carrier (111.625.00.1)

• Duravit Wall-Mounted Toilet Spare Part
  

  1003761000

• Wall-Hung Toilet Connector Set, HDPE
• White Cover Caps
• Includes Mounting Hardware
• For Use With Geberit DuoFix Carriers (111.255, 111.335, 111.728)