Accessories

• Elongated toilet seat with open front design
• 3.75 Inch front opening
• Includes toilet seat, color matched bumpers, concealed hinge, and mounting hardware
• Made with durable materials for long-lasting commercial use
• Lid not included

• 1 required for each touchless flush unit
• Transforming the mains voltage to extra-low voltage 4.1 V DC
• Maximum distance 1.5m cable connection
• Protection degree – IP20
• Mains frequency – 50-60 Hz
• Nominal voltage – 85-240 V AC
• Dimensions – W77 x H77mm

• 3″ No-Hub Right-Hand Inlet with Flow to Left
• Maintain a sanitary environment with wall-mounted fixture
•  Adjustable carrier system
•  Standard foot provides 1/2″ markings to help gauge rough-in height
•  Pre-fabrication foot options for attachment to either angle iron or strut
•  300 lb. standard load rating

Freestanding Tub Drain Rough-in Kit — CUPC certification, 1-year warranty.

Package Includes:

• ABS Pipe
• ABS Adapter
• Drop-in tub drain ABS Plate
•  Brass Tailpiece
•  Top Brass Nut
• Overflow Gasket
• Lubricant
• Test/Dustproof Plug
• Installation Instruction

• The soft-close lid forces a gentle descent, ensuring the lid will never slam shut
• Easily removable with Quick-Release function
• Stainless Steel Hinges
• Round-front toilet seat with lid designed to complement a wide variety of round-front toilet designs
• Constructed from plastic for reliability
• Coordinates with products from the D-Neo line seamlessly
• Covered under Duravit’s 1-year warranty
• Height: 1-3/4″ (top to bottom)
• Depth (Projection): 17-3/8″ (back of the hinges to the front most part of the seat)
• Width: 14-3/4″ (left edge to the right edge of the inner opening of the seat)

• Elongated seat with lid
• Covered under Duravit’s 1 year warranty
• Coordinates with products from the DuraStyle line seamlessly
• The soft-close lid forces a gentle descent, ensuring the lid will not slam shut
• Secure mounting assembly while keeping installation fast and easy
• All hardware required for installation is included

• Elongated seat with lid
• Covered under Duravit’s 1 year warranty
• Coordinates with products from the DuraStyle line seamlessly
• The soft-close lid forces a gentle descent, ensuring the lid will not slam shut
• Secure mounting assembly while keeping installation fast and easy
• All hardware required for installation is included
• Designed to complement the following Duravit toilets: 215701, 253709, 215609, 216001, 254209

• Closed front, elongated SoftClose toilet seat and cover
• Quick release hinge system for easy cleaning
• Slow closing seat and lid action reduces the chance of injury and unwanted noise
• Ultra sleek and slim design
• New design with more stable fit and reduced seat wobble
• Conceals TOTO WASHLET+ channels in TOTO T40 WASHLET+ bowls
• Solid high-impact resin plastic with stainless steel hinge plate covers
• Included: SoftClose seat and mounting hardware

• Conceals TOTO WASHLET+ channels in TOTO T40 WASHLET+ bowls
• Solid high-impact, high gloss polypropylene
• Slow closing seat and lid action reduces the chance of injury
• Closed front elongated shape
• Eliminates annoying toilet seat slam
• Rubber bumpers for more secure contact with the toilet bowl

• Slow Closing Seat and Lid action reduces the chance of injury
• Eliminates the toilet from Slamming
• Solid High-Impact, High Gloss Polypropylene
• For Use with Elongated Front Bowls
• Cotton White Finish

• Brass Coarse Thread Strainer with 5/16-18 UNC thread-in Crossbar (accepts most drain mechanisms)
• Strainer Height: 2-1/8″
• Clicker® Stopper
• Features an 1-1/2″ ABS/DWV Hub
• Waste Fitting Height: 2-9/16″

• Chrome Plated
• Minimum grid hole size is .20″/5.08mm with 19 holes per grid
• Type: P.O. with Overflow
• Forged Brass Strainer
• 17GA Tailpiece
• Size: 1-1/4″
• Length: 8″

• 16 in. of length connector with 3/8 in. compression connection to water shut-off valve
• Connects to standard toilet 7/8 in. ballcock inlet, hand-tighten wing nut for quick and easy connection
• Bends freely, without kinking or crimping, installation is easier, especially in cramped quarters
• External corrosion resistance to common household, tile and glass cleaners
• Internal corrosion resistance to harsh water conditions
• 8-sided pneumatic crimp for greater dependability and reliable nut-to-hose connections
• Temperature rating: 40 Degree to 140 Degree F, intermittent to 180 Degree F
• Pressure rating: 125 psi maximum
• No-lead certified
• CSA Certified

• PVC construction
• 2″ ABS/DWV Hub connection
• Reversible ABS clamping collar
• 3 Brass screws
• cCSAus Meets UPC Certified

• Discrete drainage, which inconspicuously fits into the overall look
• Particularly easy handling and installation
• Corrosion-resistant and UV-stable material for a durable design solution
• Inspection element enables easy cleaning and maintenance of the channel
• Conforms to the Building Products Directive (CE)
• Car drive-on capable
• Slot width 10 mm /slot height 60 mm
• Installation instructions directly on every slotted frame element

0.5 m Stainless Steel Self Inspection Element Unit

Used with ACO Brickslot Drain Channels

• One valve body for both 2-way and 3-way applications
• Perfectly aligned inlets and outlets eliminates the potential for misaligned piping and rough-in errors
• Flush plugs/test caps allow valve body to be tested and flushed without the presence of the valve cartridge, sold separately with trim
• Can be tested using flush plug with air (200 psi) or water (300 psi)
• Stainless steel retaining ring with flats secures flush plug and cartridge, eliminating the need for screws
• Flat back allows valve to be mounted flush against cross brace for easy and solid installation
• DZR cast brass body is durable, corrosion resistant and ideal for prolonged contact with water
• Back-to-back capability allowing hot and cold to be reversed quickly and easily
• Exclusive plaster guard is designed to protect valve and act as a guide during installation
• Plaster guard can serve as mounting support for thin-wall installations
• Wide rough-in range from 1-3/4 in. to 2-3/4 in. from finished wall to back of valve
• Includes service stops for easy servicing at the valve
• Cartridge ships with trim

• Helps increase sanitation and enhances overall hygiene
• Provides a hands-free automatic flush after every use
• Required components for proper operation: TOTO Dual flush one-piece or two-piece T40 WASHLET+ toilet and Auto Flush compatible WASHLET+ electronic bidet seat

• Compatible With Selected Toto Toilets: This kit is for use with the TOTO AP & TOTO EP toilet systems only
• Reliable and Long-lasting: Premium quality material used in this kit means no worries of having a toilet malfunction due to faulty parts. It’s built to last, giving you years of hassle-free performance.
• Easy Installation: The TOTO THU805 washlet connection kit makes installation of your S500e Washlet quick and easy! All the components you need to make the right connections are included in this kit.
• ½ Inch straight shutoff valve kit

• Carimali Rough-In Valve W2501 For DSIDE Wall-Mount Faucet DSD2502EST.
• %100 Made In Italy

– Standard 1-1 / 4 ’’
– Chromed Brass
– Seals included
– Clamping rings
– Cover plate

• Connection Elbow for Floor Outlet Pipe
• Fits to the Toilet With a Horizontal Drain

• Solid brass construction
• Ceramic Cartridge
• Lifetime manufacturer warranty for residential uses

• Adjustable for all TOTO toilet tanks.
• Standard 7/8 inch inlet connection.
• Includes valve, refill tube and clamp, cone washer and nut.
• Resets your tank back to optimal performance.

• Grohe 1/2″ Thermostatic Cartridge
• Right Side
• Model 47175000

• Grohe 47439000 Universal 1/2″  Thermostatic Compact Cartridge
• UNIVERSAL (GROHE) 1/2″ THERMOSTATIC COMPACT CARTRIDGE
• Length: 3-1/8″
• Model 47439000
• UPC 400517681197

• ACO Stainless steel sieve/strainer
• Collects hair and debris
• Sits inside 2″ diameter outlet

Used with ACO plain body channel

Allows connection and clamping of a CPE flexible membrane with a compression fit

Weight: 0.49 (1.1)
Product Width: 164 mm
Product Height: 164 mm

• Genuine TOTO outlet adapter for MS874S MS884 MS904 toilets
• Hardware to secure to tile or wood floor included
• Adapts select TOTO toilets to a 10 inch rough-in
• PVC body with rubber gasket
• Requires wax ring and floor drain bolts

• Genuine TOTO outlet adapter for Vespin® II Toilets
• Hardware to secure to tile or wood floor included
• Adapts select TOTO toilets to a 14 inch rough-in
• PVC body with rubber gasket
• Requires wax ring and floor drain bolts

• Dual Flush valve assembly for TOTO Aquia Toilets
• For use with CST646CEMFGNAT40,MS646124CEMF(G)N, MS646234CEMFGN, MW6463046CEMFGN(A), MW6463056CEMFGN(A), MW6463074CEMFGN and MW6463084CEMFGN toilets

• Genuine TOTO outlet adapter
• Hardware to secure to tile or wood floor included
• Adapts select TOTO toilets to a 14 inch rough-in
• PVC body with rubber gasket
• Requires wax ring and floor drain bolts

• Genuine TOTO outlet adapter
• Hardware to secure to tile or wood floor included
• Adapts select TOTO toilets to a 10 inch rough-in
• PVC body with rubber gasket
• Requires wax ring and floor drain bolts

• Top Spud-Exposed
• Piston Valve action with 1.28 GPF
• Left/Right rough-in
• Solid bronze piston valve, only one moving part
• Standard size, replaces most flush valves
• ADA compliant

• Manual operated, non-hold open, urinal flushometer valve complete with 3/4″ angle stop and 3/4″ vacuum breaker set
• Piston valve action with 0.5 gpf
• Left/right rough-in
• Top spud-exposed
• ADA compliant

• TOTO THU3010 Urinal Drain Cover Assembly, Stainless Steel
• Purpose of use for Plumbing Fixtures, Bath Faucets and Accessories
• Manufactured in United States
• For Use With TOTO Urinal UT104E