American Standard Aspirations Widespread Faucet
$330.00 – $480.00
- EASY SINK CLEANING: High-arc 150° swivel spout offers generous clearance to perform bathroom tasks and reach every corner of the sink for easy cleaning
- NO-DRIP RELIABILITY: Equipped with ceramic disc valve for exceptional performance
- GREAT PRICE: Premium quality single-handle faucet
- ALL METAL CONSTRUCTION: Two-handle faucet is made of metal for lasting dependability
- CONVENIENT DRAIN DESIGN: Metal push pop-up drain is easy to use and convenient when cleaning or removing clogs
- EASY TO INSTALL: DIY-friendly bathroom faucet is easy to install
- REDUCES WATER USE: WaterSense certified for water savings and efficiency
- LEAD-FREE: Compliant with all national and regional lead-free regulations
- WARRANTY: Limited lifetime warranty
- ADA & WaterSence Compliant
American Standard Flash Shower Rough-In Valve RU101
$85.00
- Flush Plug: Eliminates the need to remove cartridge during installation and allows installer to flush the lines without cross flow. Can be tested using flush plug with air (200 psi) or water (300 psi).
- Stainless Steel Retaining Ring with Flats: Secures test cap/ cartridge in place and eliminates need for screws. Flats make it simple to loosen ring for quick, easy insertion/removal of test cap/cartridge.
- Flat Back: Allows valve to be mounted flush against cross brace for easy and solid installation
- Cast DZR Brass Valve Body: Resists corrosion due to high chloride and pH levels in water.
- Back-to-Back Capability: Hot and cold can be reversed quickly and easily.
- Exclusive Plaster Guard: Plaster guard is designed to protect valve and act as a guide during installation. It can serve as mounting support for thin-wall installations.
- Wide Rough-in Range: From 1-3/4″ to 2-3/4″ from finished wall to the back of the valve.
- 1/2″ Male NPT/Sweat inlets/outlets accept 1/2″ copper, 1/2″ iron pipe, PEX or CPVC adapters
- Cartridge Ships with Trim
American Standard Nextgen Touchless Faucet 7755205.002
$479.00
- 5-Year CR-P2 lithium battery installed in faucet
- Touchless operation limits the spread of germs
- Above-deck mixing with removable handle
- Dual inlets for hot and cold water
- Clean, integrated design. No control box below deck
- Easy installation and maintenance: Faucet installs from the top. All serviceable parts are easily accessible
- Auto Purge: Periodically purges stagnant water
- Safety Timer: Automatically turns water off after 55 seconds
- Vandal-resistant 0.5 gpm/1.9 Lpm pressure-compensating multi-laminar spray
- Optional deck plate for 4-inch (102 mm) or 8-inch (203 mm) centers available
- ADA Compliant
American Standard R950 Tub Filler Rough-In Valve
Original price was: $205.00.$196.00Current price is: $196.00.
4% Off
- Durable Brass Construction
- Dust Guard included protects valve from debris and serves as guide for installation depth
- Test plugs included for water testing without needing trim
- Brass Construction: Durable. Ideal for prolonged contact with water.
- Self-Leveling Hardware Included: Allows for a precise installation.
- Dimensions: 14.45 x 14.45 x 14.29 cm
- 454 g
American Standard Round Freestanding Tub Filler
$1,045.00 – $1,550.00
- Installs with Flash Rough valve platform
- Durable brass construction
- Rigid brass and copper waterway
- 35mm washerless 1/4 turn ceramic disc valve cartridge
- Metal single function personal shower with easy to clean spray face features a 59″ long metal hose
- 1.8 gpm/6.8 L/min. maximum Handheld flow rate
- Shower bracket pivots 60°
- Includes double check valves to prevent back flow
- Brass Construction: Durable. Ideal for prolonged contact with water.
- Ceramic Disc Valve Cartridge: Assures a lifetime of drip-free performance
- Choice of Finishes: Wide range of durable finishes
American Standard Serin Bidet Faucet 2064401.002
$495.00
- Speed Connect® from American Standard—the pre-assembled drain that makes American Standard the easiest brand bathroom faucet to install
- Ceramic disc valves provide a lifetime of smooth handle operation and drip-free performance
- Exclusive Speed Connect metal drain
- Fewer Parts – Installs in less time
- No Adjustments – Seals the first time and every time
- Flexible stainless steel cable – installs effortlessly in tight spaces
- Lifetime finish won’t tarnish or scratch
- Coordinating Bath/Shower, Deck Mount Tub Filler and Bathroom Sink faucets available
American Standard Serin Shower Kit TU064508
$310.00 – $435.00
- Includes One-Piece Cartridge: Simplifies installation and maintenance.
- Double Ceramic Pressure Balance Cartridge: Combination of Ceramic Disc Mixing Valve and a Ceramic Balancing Spool in a one-piece cartridge.
- Ceramic Disc Mixing Valve: Assures a lifetime of drip-free performance and smooth handle operation.
- Ceramic Balancing Spool: Maintains a constant output temperature in response to changes in relative hot and cold supply pressure. Ceramic material is unaffected by mineral deposits and harsh water conditions.
- Integrated Check Valves: Engineered to eliminate cross flow.
- Adjustable Hot Limit Safety Stop: Limits the amount of hot water allowed to mix with cold. Reduces the risk of accidental scalding.
- Comfort Zone: Offers a wider shower range to fine tune the desired temperature within the useful temperature zone.
- Back-to-Back Capability: Hot and cold can be reversed quickly and easily.
- Water Saving: Saves 30% water usage.
- Water-saving 4-3/4″ (120 mm) 3-function showerhead, 1.75 gpm/6.6 L/min maximum flow
- Shower arm and flange
- Metal wall escutcheon
- Metal lever handle
- Metal slip-on diverter tub spout
- For Use with Flash Shower Rough-In Valves
- WaterSense® Certified. Meets all ANSI/ASME low consumption, water conservation requirements
American Standard Serin Single Handle Faucet
$290.00 – $400.00
- Space-saving, modern single-handle faucet design
- Includes a matching color drian
- Ceramic disc valve cartridge ensures a lifetime of drip-free performance
- Adjustable hot limit safety stop allows you to limit the amount of hot allowed to mix with cold, to help prevent accidental scalding
- ADA Compliant for handicap accessible use
- Lead Free
- No Adjustments – Seals the first time and every time
- Flexible stainless steel cable – installs effortlessly in tight spaces
- Lifetime finish won’t tarnish or scratch
- Coordinating Bath/Shower, Deck Mount Tub Filler and Bidet faucets available
- CEC Listed & CALGreen Compliant
American Standard Serin Widespread Faucet 2064801
$360.00
- Speed Connect from American Standard – the pre-assembled drain that makes American Standard the easiest brand bathroom faucet to install
- Brass Construction: Durable. Ideal for prolonged contact with water. Provides the finest surface for application of colors and finishes
- Ceramic Disc Valve Cartridges: Assures a lifetime of drip-free performance
- Low Lead: Meets NSF Standard 61/Section 9 & Prop 65 lead requirements
- Adjustable hot limit safety stop allows you to limit the amount of hot allowed to mix with cold, to help prevent accidental scalding
- 1.2 gallons per minute (4.5 L/min) maximum flow rate helps to save water
- No adjustments required – seals the first time, every time
- Flexible stainless steel cable – installs effortlessly in tight spaces
- Choice of Finishes: Available in Polished Chrome or Satin Nickel (PVD)
- Metal lever handles
- ADA & WaterSense Compliant
American Standard Shower Rough-In Valve RU101SS
$115.00
- Flush Plug: Eliminates the need to remove cartridge during installation and allows installer to flush the lines without cross flow. Can be tested using flush plug with air (200 psi) or water (300 psi).
- Stainless Steel Retaining Ring with Flats: Secures test cap/ cartridge in place and eliminates need for screws. Flats make it simple to loosen ring for quick, easy insertion/removal of test cap/cartridge.
- Flat Back: Allows valve to be mounted flush against cross brace for easy and solid installation
- Cast DZR Brass Valve Body: Resists corrosion due to high chloride and pH levels in water.
- Back-to-Back Capability: Hot and cold can be reversed quickly and easily.
- Exclusive Plaster Guard: Plaster guard is designed to protect valve and act as a guide during installation. It can serve as mounting support for thin-wall installations.
- Wide Rough-in Range: From 1-3/4″ to 2-3/4″ from finished wall to the back of the valve.
- 1/2″ Male NPT/Sweat inlets/outlets accept 1/2″ copper, 1/2″ iron pipe, PEX or CPVC adapters
- Includes Screwdriver Stops for easy servicing at the valve
- Cartridge Ships with Trim