Franke Peak 30” Double Bowl Steel Sink PKX160-RH-S
$3,085.00
- Overall Sink Size (OD) 30⅞” x 17¾”
- Bowl Size (ID) 29¾” x 16½”
- Bowl Depth (ID) 9⅝” & 7⅛”
- Minimum Cabinet Size: 33″
- Gauge: 16
- Weight: 35 lbs
- Sound Dampening: Sound Pad & Spray Coat
- Integral Franke Ledge System
- Stainless Finish: Diamond
- Corner Radius: 5 mm
- Installation: Undermount
- 2 Square drain covers & 2 Strainer Baskets included
Franke Peak Stainless Steel Kitchen Sink Workcenter
$2,725.00
- Franke 28.75-in. x 17.75-in. 16 Gauge Stainless Steel Single Bowl Kitchen Sink
- Accessories Included: Bottom/Shelf Grid, Colander, Cutting Board, Strainer Basket and Drain Cover
- Integrated Ledge: The integrated ledge enhances your workspace by allowing you to work directly over the sink. Custom-fit accessories streamline the workflow
- Multi-Level Workspace: The bottom sink grid raises to sit on the integrated ledge, creating a higher level workspace to expand your prep, clean and rinse area
- Removable Drain Cover: The removable square drain cover conceals the drain for a seamless bowl surface, while providing a flat bottom surface to allow for more usable workspace. Square drain cover included
- Undermount Installation: Fitted underneath the counter, it gives an edgeless finish that is easy to clean
Franke Culinary Center Stainless Steel Sink CUX16021-W
$2,579.00
- Accessories included: walnut cutting board, black cutting board, colander, cutting mat, glass cutting board, knife set, knife holder, wire rack and frame cover.
- Storage compartment bowl doubles as an additional sink for cleaning or prepping.
- The 12mm radius corners and round drain cover accentuate the elegance of the design
- Overall Sink Size (OD) 35 3/16” x 21 ⅜”
- Bowl Size (ID) 3211/16” x 18⅞”
- Bowl Depth (ID) 93/16” & 8 1/16”
- Corner Radius 12mm
- Minimum Cabinet Size 39”
- Installation Type Undermount 1/2” reveal
Franke Professional 2.0 Stainless Steel Kitchen Sink
$2,549.00
- Covered under Franke’s limited lifetime warranty
- Constructed from stainless steel
- Undermount installation – sink will install under the countertop
- Single basin design for maximum work space
- Rear drain location increases available space under the sink
- Coordinates with products from the Professional 2.0 line
- ACCESSORIES INCLUDED: Bottom Grid, Colander, Cutting Board, Strainer Basket and Drain Cover
Franke Professional 2.0 Steel Sink PS2X120-16-16-CA
$2,385.00
- Covered under Franke’s limited lifetime warranty
- Constructed from stainless steel
- Undermount installation – sink will install under the countertop
- Sink features dual basins
- Rear drain location increases available space under the sink
- Coordinates with products from the Professional 2.0 line
- Included Accessories: Bottom Grid, Strainer Basket and Drain Cover
Specifications:
- Interior Dimensions: 33″ x 17″ x 10″
- Exterior Dimensions: 35½” x 19½”
- Minimum Cabinet Size: 36″
- Gauge: 16
- Sound Dampening: Sound Pad & Spray Coat
- Stainless Finish: Diamond
- Corner Radius: 8 mm
- Installation: Undermount with ½” Reveal
- Weight: 38 lbs
Franke Peak Stainless Steel Kitchen Sink PKX11028-S
$2,375.00
- Overall Sink Size (OD) 28¾” x 17¾”
- Bowl Size (ID) 273/16” x 16½”
- Bowl Depth (ID) 9⅝”
- Minimum Cabinet Size: 30″
- Gauge: 16
- Weight: 29 lbs
- Sound Dampening: Sound Pad & Spray Coat
- Integral Franke Ledge System
- Stainless Finish: Diamond
- Corner Radius: 5 mm
- Installation: Undermount
- Square drain cover & Strainer Basket included
Franke Peak Stainless Steel Kitchen Sink PKX11025-S
$2,360.00
- Interior Dimensions: 25″ x 16½” x 9⅝”
- Exterior Dimensions: 263/16″ x 17¾”
- Minimum Cabinet Size: 27″
- Gauge: 16
- Weight: 27 lbs
- Sound Dampening: Sound Pad & Spray Coat
- Integral Franke Ledge System
- Stainless Finish: Diamond
- Corner Radius: 5 mm
- Installation: Undermount
- Square drain cover & Strainer Basket included
Franke Peak Stainless Steel Kitchen Sink PKX11021-S
$2,310.00
- Franke PKX11021 Features:
- Covered under Franke’s limited lifetime warranty
- Constructed from stainless steel
- Undermount installation – sink will install under the countertop
- Single basin design for maximum work space
- Rear drain location increases available space under the sink
- Coordinates with products from the Peak line
Specifications:
- Sink Length: 22-13/16″
- Sink Width: 17-3/4″
- Sink Height: 9-5/8″
- Basin Dimensions: 21-5/8″ L x 17-3/4″ W x 9-5/8″ D
- Minimum Cabinet Size: 27″
- Drain Connection Size: 3-1/2″
- Franke PKX11021 Features:
Franke Professional 2.0 Steel Sink PS2X120-14-14-CA
$2,280.00
- Covered under Franke’s limited lifetime warranty
- Constructed from stainless steel
- Undermount installation – sink will install under the countertop
- Sink features dual basins
- Rear drain location increases available space under the sink
- Coordinates with products from the Professional 2.0 line
- Included Accessories: Bottom Grid, Strainer Basket and Drain Cover
Specifications:
- Interior Dimensions: 29″ x 17″ x 10″
- Exterior Dimensions: 31½” x 19½”
- Minimum Cabinet Size: 33″
- Gauge: 16
- Sound Dampening: Sound Pad & Spray Coat
- Stainless Finish: Diamond
- Corner Radius: 8 mm
- Installation: Undermount with ½” Reveal
- Weight: 32lbs
Franke Professional 2.0 Steel Sink PS2X160-18-11-CA
$2,145.00
- Covered under Franke’s limited lifetime warranty
- Constructed from stainless steel
- Undermount installation – sink will install under the countertop
- Sink features dual basins
- Rear drain location increases available space under the sink
- Coordinates with products from the Professional 2.0 line
- Included Accessories: Bottom Grid, Strainer Basket and Drain Cover
- Specifications:
- Sink Length: 32-1/2″
- Sink Width: 19-1/2″
- Sink Height: 10″
- Basin Dimensions (Left): 18″ L x 17″ W x 10″ D
- Basin Dimensions (Right): 11″ L x 17″ W x 9″ D
- Minimum Cabinet Size: 36″
- Drain Connection Size: 3-1/2″
- Weight: 34lbs
Franke Peak Stainless Steel Kitchen Sink PKX11018-S
$2,120.00
- Exceedingly attractive. The perfect harmonization of minimalist style and maximum performance makes the Peak sink truly innovative.
- 16-gauge stainless steel is hand fabricated to ensure highest levels of finish quality and durability
- Franke Integral Ledge System – designed to support a shelf grid which turns your sink into a true ergonomic workstation.
- Precision 5mm sink corner radius provides an ultra modern and clean look in your kitchen
- Sound dampening pads on the sink minimize excessive sound when running water or using a waste disposal
- Fits Minimum Cabinet Size 24”
- Int. Dimensions – 17.75” x 16.5”, Int. Depth (Bowl 1) – 9.63”
- Ext. Dimensions – 16.88” x 17.75”
- Franke stands behind the quality of this product with a limited lifetime warranty
- Strainer Basket and Square Drain Cover
Franke Professional 2.0 Kitchen Sink PS2X110-33-CA
$2,040.00
- Covered under Franke’s limited lifetime warranty
- Constructed from stainless steel
- Undermount installation – sink will install under the countertop
- Single basin design for maximum work space
- Rear drain location increases available space under the sink
- Coordinates with products from the Professional 2.0 line
- Included Accessories: Bottom Grid, Strainer Basket and Drain Cover
- Specifications:
- Sink Length: 35-1/2″
- Sink Width: 19-1/2″
- Sink Height: 10″
- Basin Dimensions: 33″ L x 19-1/2″ W x 10″ D
- Minimum Cabinet Size: 39″
- Drain Connection Size: 3-1/2″
- Weight: 33lbs