Franke Culinary Center Stainless Steel Sink CUX16021-W
$2,479.00
- Accessories included: walnut cutting board, black cutting board, colander, cutting mat, glass cutting board, knife set, knife holder, wire rack and frame cover.
- Storage compartment bowl doubles as an additional sink for cleaning or prepping.
- The 12mm radius corners and round drain cover accentuate the elegance of the design
- Overall Sink Size (OD) 35 3/16” x 21 ⅜”
- Bowl Size (ID) 3211/16” x 18⅞”
- Bowl Depth (ID) 93/16” & 8 1/16”
- Corner Radius 12mm
- Minimum Cabinet Size 39”
- Installation Type Undermount 1/2” reveal
Franke Peak Stainless Steel Kitchen Sink Workcenter
$2,725.00
- Franke 28.75-in. x 17.75-in. 16 Gauge Stainless Steel Single Bowl Kitchen Sink
- Accessories Included: Bottom/Shelf Grid, Colander, Cutting Board, Strainer Basket and Drain Cover
- Integrated Ledge: The integrated ledge enhances your workspace by allowing you to work directly over the sink. Custom-fit accessories streamline the workflow
- Multi-Level Workspace: The bottom sink grid raises to sit on the integrated ledge, creating a higher level workspace to expand your prep, clean and rinse area
- Removable Drain Cover: The removable square drain cover conceals the drain for a seamless bowl surface, while providing a flat bottom surface to allow for more usable workspace. Square drain cover included
- Undermount Installation: Fitted underneath the counter, it gives an edgeless finish that is easy to clean
Franke Professional 2.0 Stainless Steel Kitchen Sink
$2,549.00
- Covered under Franke’s limited lifetime warranty
- Constructed from stainless steel
- Undermount installation – sink will install under the countertop
- Single basin design for maximum work space
- Rear drain location increases available space under the sink
- Coordinates with products from the Professional 2.0 line
- ACCESSORIES INCLUDED: Bottom Grid, Colander, Cutting Board, Strainer Basket and Drain Cover
Franke Pescara 32 1/2″ Steel Workcenter Kitchen Sink
$1,920.00
- Accessories Included: Bottom Grid, Shelf Grid, Colander, Cutting Board, Strainer Basket and Drain Cover
- Optional Accessories : Glass Cutting Board (PT-40S), Cutting Mat (SP-40S), Roller Mat (UV-36RM)
- Integrated Ledge System: Shelf grid sits conveniently on the integrated ledge system, creating an elevated workspace. Perfect for expanding your workspace when you prep, rinse, and clean.
- Concealed Drain: The removable drain cover conceals the drain for a seamless bowl surface while providing a flat bottom that helps prevent glassware from tipping over.
- Commercial Grade Stainless Steel: Made of 18 gauge T304 stainless steel, highly resilient to corrosion and stains, and extremely durable to handle the everyday tasks in the busiest of kitchens.
- Undermount Installation: Fitted underneath the counter, it gives an edgeless finish that is easy to clean.
Franke Orca 2.0 Workcenter Kitchen Sink – Stainless Steel
$1,899.00
- Accessories Included: Bottom / Shelf Grid, Cutting Board, Roller Mat / Shelf Grid, Wire Basket, Strainer Basket and Drain Cover
- Clean-up Zone: Turn the shelf grid into a drying rack while still allowing ample bowl space for washing dishes
- Deep Capacity Bowl: The large deep bowl makes it easy to clean large cookware items and minimizes splashing, offering the form and function you expect from your sink
- Undermount Installation: Fitted underneath the counter, it gives an edgeless finish that is easy to clean
Franke Cube Workcenter Stainless Steel Kitchen Sink
$1,470.00
- Accessories Included – All-In Accessory System 3, Bottom Sink Grid, Strainer Basket
- Deep Capacity – Bowl – A large deep bowl makes it easy to clean cookware items and minimizes splashing, offering the form and function you expect from your sink
- Easy to Clean – the resilient Pearl finish will stand up to heavy everyday use
- Efficient Drain – The pitched bottom creates efficient draining, and the rear drain placement provides additional storage below the sink
- Undermount Installation – Fitted underneath the counter, it gives an edgeless finish that is easy to clean
Franke Peak Undermount Stainless Steel Sink PKX1108-S
$1,150.00
- Minimalist Design: The 5mm radius corners and invisible drain provide an eye-catching design element to the kitchen.
- Rear Drain and Drain Cover: The removable square drain cover conceals the drain for a seamless bowl surface, while providing a flat bottom surface to allow for more usable workspace. Square drain cover included.
- Sound Dampening System: Sound pads and spray coat absorbs and reduces the noise caused by a garbage disposal or running water.
- Diamond Finish: Franke’s luxurious and desirable ultra satin surface makes our stainless steel easier to clean. It is also an important sanitary feature. The smooth surface obtained by our manufacturing and polishing methods ensures better corrosion resistance.
- Exterior Dimensions: 8.25-in. left-to-right x 17.75-in. front-to-back.
- Interior Dimensions: 7.13-in. left-to-right x 16.5-in. front-to-back x 7-in deep
- Minimum Cabinet Size: 12-in.
- Accessories Included: Drain Cover, 3.5″ polished sink strainer assembly
Franke Peak Stainless Steel Kitchen Sink PKX11013-S
$1,815.00
- 5mm Corner radius for optimum cleanability
- 16 Gauge, 18/10 Stainless Steel
- Exterior Dimensions – 14 9/16-in Wide x 17 3/4-in Length
- Interior Dimensions – 13 3/8-in Wide x 16 1/2-in Length
- 10-in Deep bowls to help easily accommodate anything from bowls and plates to baking pans and large pots.
- 2 degree bottom slope provides optimum drainage without sacrificing usable work surface.
- New design concept allows for the same grid to be used as both a bottom grid and a shelf.
Franke Peak Kitchen Sink PKX11016-S Stainless Steel
$1,970.00
- Exceedingly attractive. The perfect harmonization of minimalist style and maximum performance makes the Peak sink truly innovative.
- 16-gauge stainless steel is hand fabricated to ensure highest levels of finish quality and durability
- Franke Integral Ledge System – designed to support a shelf grid which turns your sink into a true ergonomic workstation.
- Precision 5mm sink corner radius provides an ultra modern and clean look in your kitchen
- Sound dampening pads on the sink minimize excessive sound when running water or using a waste disposal
- Fits Minimum Cabinet Size 21”
- Int. Dimensions – 15.75” x 16.5”, Int. Depth (Bowl 1) – 9.63”
- Ext. Dimensions – 14.56” x 17.75”
- Franke stands behind the quality of this product with a limited lifetime warranty
- Strainer Basket and Square Drain Cover
Franke Peak Stainless Steel Kitchen Sink PKX11018-S
$2,120.00
- Exceedingly attractive. The perfect harmonization of minimalist style and maximum performance makes the Peak sink truly innovative.
- 16-gauge stainless steel is hand fabricated to ensure highest levels of finish quality and durability
- Franke Integral Ledge System – designed to support a shelf grid which turns your sink into a true ergonomic workstation.
- Precision 5mm sink corner radius provides an ultra modern and clean look in your kitchen
- Sound dampening pads on the sink minimize excessive sound when running water or using a waste disposal
- Fits Minimum Cabinet Size 24”
- Int. Dimensions – 17.75” x 16.5”, Int. Depth (Bowl 1) – 9.63”
- Ext. Dimensions – 16.88” x 17.75”
- Franke stands behind the quality of this product with a limited lifetime warranty
- Strainer Basket and Square Drain Cover
Franke Peak Stainless Steel Kitchen Sink PKX11021-S
$2,310.00
- Franke PKX11021 Features:
- Covered under Franke’s limited lifetime warranty
- Constructed from stainless steel
- Undermount installation – sink will install under the countertop
- Single basin design for maximum work space
- Rear drain location increases available space under the sink
- Coordinates with products from the Peak line
Specifications:
- Sink Length: 22-13/16″
- Sink Width: 17-3/4″
- Sink Height: 9-5/8″
- Basin Dimensions: 21-5/8″ L x 17-3/4″ W x 9-5/8″ D
- Minimum Cabinet Size: 27″
- Drain Connection Size: 3-1/2″
- Franke PKX11021 Features:
Franke Peak Stainless Steel Kitchen Sink PKX11025-S
$2,360.00
- Interior Dimensions: 25″ x 16½” x 9⅝”
- Exterior Dimensions: 263/16″ x 17¾”
- Minimum Cabinet Size: 27″
- Gauge: 16
- Weight: 27 lbs
- Sound Dampening: Sound Pad & Spray Coat
- Integral Franke Ledge System
- Stainless Finish: Diamond
- Corner Radius: 5 mm
- Installation: Undermount
- Square drain cover & Strainer Basket included
More About Saniterica
Saniterica provides you with quality bathroom and plumbing products including toilets, Wall Hungs, in-wall Toilet tanks, Faucets, Shower sets and vanities. We deliver to Toronto, Mississauga, Vaughan, GTA, Markham, Oakville, Scarborough, Richmond Hill, Brampton and Oshawa.
Shop
Your account
© Copyright 2024 SANITERICA | All Rights Reserved | Web Design by SEYVANCO