Rough Ins

• Flush Plug: Eliminates the need to remove cartridge during installation and allows installer to flush the lines without cross flow. Can be tested using flush plug with air (200 psi) or water (300 psi).
• Stainless Steel Retaining Ring with Flats: Secures test cap/ cartridge in place and eliminates need for screws. Flats make it simple to loosen ring for quick, easy insertion/removal of test cap/cartridge.
• Flat Back: Allows valve to be mounted flush against cross brace for easy and solid installation
• Cast DZR Brass Valve Body: Resists corrosion due to high chloride and pH levels in water.
• Back-to-Back Capability: Hot and cold can be reversed quickly and easily.
• Exclusive Plaster Guard: Plaster guard is designed to protect valve and act as a guide during installation. It can serve as mounting support for thin-wall installations.
• Wide Rough-in Range: From 1-3/4″ to 2-3/4″ from finished wall to the back of the valve.
• 1/2″ Male NPT/Sweat inlets/outlets accept 1/2″ copper, 1/2″ iron pipe, PEX or CPVC adapters
• Cartridge Ships with Trim

• Durable Brass Construction
• Dust Guard included protects valve from debris and serves as guide for installation depth
• Test plugs included for water testing without needing trim
• Brass Construction: Durable. Ideal for prolonged contact with water.
• Self-Leveling Hardware Included: Allows for a precise installation.
• Dimensions: 14.45 x 14.45 x 14.29 cm
• 454 g

• Flush Plug: Eliminates the need to remove cartridge during installation and allows installer to flush the lines without cross flow. Can be tested using flush plug with air (200 psi) or water (300 psi).
• Stainless Steel Retaining Ring with Flats: Secures test cap/ cartridge in place and eliminates need for screws. Flats make it simple to loosen ring for quick, easy insertion/removal of test cap/cartridge.
• Flat Back: Allows valve to be mounted flush against cross brace for easy and solid installation
• Cast DZR Brass Valve Body: Resists corrosion due to high chloride and pH levels in water.
• Back-to-Back Capability: Hot and cold can be reversed quickly and easily.
• Exclusive Plaster Guard: Plaster guard is designed to protect valve and act as a guide during installation. It can serve as mounting support for thin-wall installations.
• Wide Rough-in Range: From 1-3/4″ to 2-3/4″ from finished wall to the back of the valve.
• 1/2″ Male NPT/Sweat inlets/outlets accept 1/2″ copper, 1/2″ iron pipe, PEX or CPVC adapters
• Includes Screwdriver Stops for easy servicing at the valve
• Cartridge Ships with Trim

• Solid brass construction
• Crystal clear water flow
• Handshower with 5′ reinforced PVC hose
• Pull-button diverter on the side of the spout
• 1/2″ connection
• EASY-FIT installation system included (see installation guide for details)
• Height: 37″
• Overall projection: 12 11/16“
• Flow rate: (tub filler) 4.5 gpm (handshower) 2.5 gpm
• CALGreeen Code

• High flow thermostat cartridge
• Universal inlets for 3/4″ and 1/2″ connections (built-in female threads for 1/2″ connections and male threads for 3/4″ connections)
• Reversible service check valves with filters and improved stop mechanism
• Italian made nickel plated solid brass rough, Vernet thermostatic cartridge and Fluehs diverter cartridge
• Shut-off valve outlets: connections right, left or both sides simultaneously
• Removable NPT plug at the top for an extra independent shut-off valve (#1206) or diverter with stop (#61934) connection
• Vertical water inlets for a fast and efficient installation
• Can be installed horizontally or vertically
• Safety temperature stop, preset at 38˚C / 100˚F

Rough-In For Concealed Installation

Installation Depth 3″ – 4 1/8″

With Shut-Off Valves

Rough-In For Concealed Installation

Volume Control For 2 Outlets

With Shut-Off Valve

Connecting Thread 1/2″ NPT

Rough-In For Concealed Installation

Volume Control For 1 Outlet

With Shut-Off Valve

Connecting Thread 1/2″ NPT

• GrohFlex Universal Rough-In Valve
• For Use With GrohFlex Shower Trims
• 1/2″ Inlets and Outlets
• Fixing Points For Front and Back Wall
• Leakproof Housing

• Rough-In Pressure Balance Valve Without Diverter
• Optional Various Inlets and Outlets
• Flush Plug Included
• Made of DZR Brass
• Wide Rough-In Range From 1-3/4″ in. to 2-3/4″ in.

• One valve body for both 2-way and 3-way applications
• Perfectly aligned inlets and outlets eliminates the potential for misaligned piping and rough-in errors
• Flush plugs/test caps allow valve body to be tested and flushed without the presence of the valve cartridge, sold separately with trim
• Can be tested using flush plug with air (200 psi) or water (300 psi)
• Stainless steel retaining ring with flats secures flush plug and cartridge, eliminating the need for screws
• Flat back allows valve to be mounted flush against cross brace for easy and solid installation
• DZR cast brass body is durable, corrosion resistant and ideal for prolonged contact with water
• Back-to-back capability allowing hot and cold to be reversed quickly and easily
• Exclusive plaster guard is designed to protect valve and act as a guide during installation
• Plaster guard can serve as mounting support for thin-wall installations
• Wide rough-in range from 1-3/4 in. to 2-3/4 in. from finished wall to back of valve
• Includes service stops for easy servicing at the valve
• Cartridge ships with trim

• Rough-In Pressure Balance Valve With Diverter
• 1/2″ Universal Inlets/Outlets
• Optional Built-In Spring-Loaded or Manual Diverter
• Handle Limit Stop