Filter by price

Product categories

Brands

  • Grohe GrohSafe 3.0 Pressure Balance Rough-In Valve

    $115.00$138.00

    • Rough-In Pressure Balance Valve Without Diverter
    • Optional Various Inlets and Outlets
    • Flush Plug Included
    • Made of DZR Brass
    • Wide Rough-In Range From 1-3/4″ in. to 2-3/4″ in.

     

  • Hansgrohe 01850181 IBox Universal Plus Rough In Valve

    Original price was: $189.00.Current price is: $179.00.

    5% Off

    • The heart of your shower system, use the iBox rough-in with any Hansgrohe or AXOR standard pressure balance or thermostatic shower valve trim (sold separately)
    • Provides enough water to supply multiple shower outlets including shower head, tub spout, hand shower, and body sprays (diverter required for 3 or more outlets and is sold separately)
    • Housing design mounts securely to wall studs and accommodates multiple wall depths and materials to fit your space (professional installation recommended)
    • Designed to penetrate and seal finished wall to prevent leaks, and to allow demo-free service access with Service Stop valves
    • The addition of PVC housing combined with rubber seals reduce in-wall vibrations and resulting noise experienced in lower cost options
    • Includes 2 inlets and 2 outlets, allowing for 2 shower functions. 3 outlets can be installed with the installation of a separate diverter (sold separately)
    • Contains standard 3/4-inch pipe inlets that can be fit to 1/2-inch pipe inlets with the purchase of a separate reducer. Note maximum pressure of 65 psi
    • Sturdy construction for lasting durability
    • Fast and easy installation
    • Adjustable installation flange
    • Includes 3/4 in. plug
    • Hansgrohe recommends a licensed plumber install this product
  • Grohe Non Rapido Floor Mounted Tub Faucet Rough-In

    $297.00

    • Floor Mounted Tub Rough-In Valve
    • Installation Depth 2″-6″
    • 1/2″ Female Connections

     

  • Aquabrass Floormount Tub Filler W/ Handshower

    $1,074.00$1,710.00

    8% Off

    • Solid brass construction
    • Crystal clear water flow
    • Handshower with 5′ reinforced PVC hose
    • Pull-button diverter on the side of the spout
    • 1/2″ connection
    • EASY-FIT installation system included (see installation guide for details)
    • Height: 37″
    • Overall projection: 12 11/16
    • Flow rate: (tub filler) 4.5 gpm (handshower) 2.5 gpm
    • CALGreeen Code
  • Aquabrass T12123 TURBO Thermostatic Valve With Diverter

    $390.00

    • High flow thermostat cartridge
    • Universal inlets for 3/4″ and 1/2″ connections (built-in female threads for 1/2″ connections and male threads for 3/4″ connections)
    • Reversible service check valves with filters and improved stop mechanism
    • Italian made nickel plated solid brass rough, Vernet thermostatic cartridge and Fluehs diverter cartridge
    • Shut-off valve outlets: connections right, left or both sides simultaneously
    • Removable NPT plug at the top for an extra independent shut-off valve (#1206) or diverter with stop (#61934) connection
    • Vertical water inlets for a fast and efficient installation
    • Can be installed horizontally or vertically
    • Safety temperature stop, preset at 38˚C / 100˚F
  • Hansgrohe 26254181 Raindance E Showerhead 400 Rough-In

    $140.00

    • Shower head rough-in for 26253 and 26255
    • Connection Size: 1/2″
    • Connection Type: NPT
  • Hansgrohe Wall-Mounted Faucet Rough-In 13622181

    $329.00

    • Easy installation for prompt use
    • Solid brass construction for long-lasting durability
    • 1/2 in. connection
    • Designed for customizing the bathroom
    • Solid brass construction for lasting durability
    • Covered under Hansgrohe’s limited lifetime warranty
  • American Standard Shower Rough-In Valve RU101SS

    $115.00

    • Flush Plug: Eliminates the need to remove cartridge during installation and allows installer to flush the lines without cross flow. Can be tested using flush plug with air (200 psi) or water (300 psi).
    • Stainless Steel Retaining Ring with Flats: Secures test cap/ cartridge in place and eliminates need for screws. Flats make it simple to loosen ring for quick, easy insertion/removal of test cap/cartridge.
    • Flat Back: Allows valve to be mounted flush against cross brace for easy and solid installation
    • Cast DZR Brass Valve Body: Resists corrosion due to high chloride and pH levels in water.
    • Back-to-Back Capability: Hot and cold can be reversed quickly and easily.
    • Exclusive Plaster Guard: Plaster guard is designed to protect valve and act as a guide during installation. It can serve as mounting support for thin-wall installations.
    • Wide Rough-in Range: From 1-3/4″ to 2-3/4″ from finished wall to the back of the valve.
    • 1/2″ Male NPT/Sweat inlets/outlets accept 1/2″ copper, 1/2″ iron pipe, PEX or CPVC adapters
    • Includes Screwdriver Stops for easy servicing at the valve
    • Cartridge Ships with Trim
  • American Standard Flash Shower Rough-In Valve RU101

    $85.00

    • Flush Plug: Eliminates the need to remove cartridge during installation and allows installer to flush the lines without cross flow. Can be tested using flush plug with air (200 psi) or water (300 psi).
    • Stainless Steel Retaining Ring with Flats: Secures test cap/ cartridge in place and eliminates need for screws. Flats make it simple to loosen ring for quick, easy insertion/removal of test cap/cartridge.
    • Flat Back: Allows valve to be mounted flush against cross brace for easy and solid installation
    • Cast DZR Brass Valve Body: Resists corrosion due to high chloride and pH levels in water.
    • Back-to-Back Capability: Hot and cold can be reversed quickly and easily.
    • Exclusive Plaster Guard: Plaster guard is designed to protect valve and act as a guide during installation. It can serve as mounting support for thin-wall installations.
    • Wide Rough-in Range: From 1-3/4″ to 2-3/4″ from finished wall to the back of the valve.
    • 1/2″ Male NPT/Sweat inlets/outlets accept 1/2″ copper, 1/2″ iron pipe, PEX or CPVC adapters
    • Cartridge Ships with Trim
  • American Standard R950 Tub Filler Rough-In Valve

    Original price was: $205.00.Current price is: $196.00.

    4% Off

    • Durable Brass Construction
    • Dust Guard included protects valve from debris and serves as guide for installation depth
    • Test plugs included for water testing without needing trim
    • Brass Construction: Durable. Ideal for prolonged contact with water.
    • Self-Leveling Hardware Included: Allows for a precise installation.
    • Dimensions: 14.45 x 14.45 x 14.29 cm
    • 454 g
  • Hansgrohe 10452181 Freestanding Tub Filler Rough In Valve

    Original price was: $790.00.Current price is: $730.00.

    8% Off

    • 1/2 in. female inlet
    • 145 psi maximum pressure
    • Brass construction for reliability and great performance
    • Rough-in for freestanding tub filler trim
    • Use to mount your tub filler on the floor beside your tub
    • May require in-line pressure balance valve # 13418181 (sold separately)
    • Solid brass construction for lasting durability
    • 16 x 16 x 20.5 cm   2.27 KG
  • Hansgrohe 16181181 Showerpipe Thermo Basic Rough-in Set

    $69.00

    • Required for showerpipe installation
    • Assists in level installation
    • For installation of Hansgrohe showerpipes and wall-mounted mixing valves
    • Includes two ½” NPT x ½” G nipples and spacing jig