Rough Ins

• Required for showerpipe installation
• Assists in level installation
• For installation of Hansgrohe showerpipes and wall-mounted mixing valves
• Includes two ½” NPT x ½” G nipples and spacing jig

• Shower Volume Control Rough-In Valve
• 1/2″ or 3/4″ Connection Threads
• For Use With Water Temperature Valve (Sold Separately)

• Flush Plug: Eliminates the need to remove cartridge during installation and allows installer to flush the lines without cross flow. Can be tested using flush plug with air (200 psi) or water (300 psi).
• Stainless Steel Retaining Ring with Flats: Secures test cap/ cartridge in place and eliminates need for screws. Flats make it simple to loosen ring for quick, easy insertion/removal of test cap/cartridge.
• Flat Back: Allows valve to be mounted flush against cross brace for easy and solid installation
• Cast DZR Brass Valve Body: Resists corrosion due to high chloride and pH levels in water.
• Back-to-Back Capability: Hot and cold can be reversed quickly and easily.
• Exclusive Plaster Guard: Plaster guard is designed to protect valve and act as a guide during installation. It can serve as mounting support for thin-wall installations.
• Wide Rough-in Range: From 1-3/4″ to 2-3/4″ from finished wall to the back of the valve.
• 1/2″ Male NPT/Sweat inlets/outlets accept 1/2″ copper, 1/2″ iron pipe, PEX or CPVC adapters
• Cartridge Ships with Trim

Rough-In For Concealed Installation

Volume Control For 1 Outlet

With Shut-Off Valve

Connecting Thread 1/2″ NPT

• Rough-In Pressure Balance Valve Without Diverter
• Optional Various Inlets and Outlets
• Flush Plug Included
• Made of DZR Brass
• Wide Rough-In Range From 1-3/4″ in. to 2-3/4″ in.

• Flush Plug: Eliminates the need to remove cartridge during installation and allows installer to flush the lines without cross flow. Can be tested using flush plug with air (200 psi) or water (300 psi).
• Stainless Steel Retaining Ring with Flats: Secures test cap/ cartridge in place and eliminates need for screws. Flats make it simple to loosen ring for quick, easy insertion/removal of test cap/cartridge.
• Flat Back: Allows valve to be mounted flush against cross brace for easy and solid installation
• Cast DZR Brass Valve Body: Resists corrosion due to high chloride and pH levels in water.
• Back-to-Back Capability: Hot and cold can be reversed quickly and easily.
• Exclusive Plaster Guard: Plaster guard is designed to protect valve and act as a guide during installation. It can serve as mounting support for thin-wall installations.
• Wide Rough-in Range: From 1-3/4″ to 2-3/4″ from finished wall to the back of the valve.
• 1/2″ Male NPT/Sweat inlets/outlets accept 1/2″ copper, 1/2″ iron pipe, PEX or CPVC adapters
• Includes Screwdriver Stops for easy servicing at the valve
• Cartridge Ships with Trim

• Rough-In Pressure Balance Valve Without Diverter
• 1/2″ PEX Expansion Inlets With 1/2″ Universal Outlets
• Flush Plug Included
• Diaphragm Cartridge
• Handle Limit Stop

• SmartBox Universal Rough-In Valve
• 3 Outlets 1/2″ Female NPT
• 2 Intlets 1/2″ Female NPT
• Mounting Options For Solid Walls and Dry Walls

• Shower head rough-in for 26253 and 26255
• Connection Size: 1/2″
• Connection Type: NPT

Rough-In For Concealed Installation

Volume Control For 2 Outlets

With Shut-Off Valve

Connecting Thread 1/2″ NPT

• GrohFlex Universal Rough-In Valve
• For Use With GrohFlex Shower Trims
• 1/2″ Inlets and Outlets
• Fixing Points For Front and Back Wall
• Leakproof Housing

• Volume Control Rough-In Valve
• 3/4″ Ceramic Cartridge
• 1/2″ NPT Connection
• 2 3/4″– 3 15/16″ Installation Depth

• Stainless steel construction
• 1/2″ male NPT connection
• Pressure balance valve
• 5.5 gpm | 21 lpm | 60 psi
• Lifetime manufacturer warranty for residential uses

• Pressure Balance In-Line Valve
• To be Installed Upstream of the Mixing Valve(s)
• 1/2″ Female Inlets

• The heart of your shower system, use the iBox rough-in with any Hansgrohe or AXOR standard pressure balance or thermostatic shower valve trim (sold separately)
• Provides enough water to supply multiple shower outlets including shower head, tub spout, hand shower, and body sprays (diverter required for 3 or more outlets and is sold separately)
• Housing design mounts securely to wall studs and accommodates multiple wall depths and materials to fit your space (professional installation recommended)
• Designed to penetrate and seal finished wall to prevent leaks, and to allow demo-free service access with Service Stop valves
• The addition of PVC housing combined with rubber seals reduce in-wall vibrations and resulting noise experienced in lower cost options
• Includes 2 inlets and 2 outlets, allowing for 2 shower functions. 3 outlets can be installed with the installation of a separate diverter (sold separately)
• Contains standard 3/4-inch pipe inlets that can be fit to 1/2-inch pipe inlets with the purchase of a separate reducer. Note maximum pressure of 65 psi
• Sturdy construction for lasting durability
• Fast and easy installation
• Adjustable installation flange
• Includes 3/4 in. plug
• Hansgrohe recommends a licensed plumber install this product

• 2-Way Rough-In Diverter Valve (Shared Function)
• 2 Discrete, 1 Shared Function
• 1/2″ NPT Threads
• PlasterGuard Included

• 2-Way Rough-In Diverter Valve (Discrete Function)
• 2 Discrete Functions
• 1/2″ NPT Threads
• PlasterGuard Included

• 4-Way Rough-In Diverter Valve
• Connection Cold and Hot 1/2″
• Bath Outlet 3/4″
• Material: Brass

• Durable Brass Construction
• Dust Guard included protects valve from debris and serves as guide for installation depth
• Test plugs included for water testing without needing trim
• Brass Construction: Durable. Ideal for prolonged contact with water.
• Self-Leveling Hardware Included: Allows for a precise installation.
• Dimensions: 14.45 x 14.45 x 14.29 cm
• 454 g

• One valve body for both 2-way and 3-way applications
• Perfectly aligned inlets and outlets eliminates the potential for misaligned piping and rough-in errors
• Flush plugs/test caps allow valve body to be tested and flushed without the presence of the valve cartridge, sold separately with trim
• Can be tested using flush plug with air (200 psi) or water (300 psi)
• Stainless steel retaining ring with flats secures flush plug and cartridge, eliminating the need for screws
• Flat back allows valve to be mounted flush against cross brace for easy and solid installation
• DZR cast brass body is durable, corrosion resistant and ideal for prolonged contact with water
• Back-to-back capability allowing hot and cold to be reversed quickly and easily
• Exclusive plaster guard is designed to protect valve and act as a guide during installation
• Plaster guard can serve as mounting support for thin-wall installations
• Wide rough-in range from 1-3/4 in. to 2-3/4 in. from finished wall to back of valve
• Includes service stops for easy servicing at the valve
• Cartridge ships with trim

• Rough-In Pressure Balance Valve With Diverter
• 1/2″ Universal Inlets/Outlets
• Optional Built-In Spring-Loaded or Manual Diverter
• Handle Limit Stop

• 3-Way Rough-In Diverter Valve
• Optional Shared or Discrete Function
• 1 Inlet, 3 Outlets
• 1/2″ NPT Threads
• PlasterGuard Included

• Wall Union Rough-In Valve
• Built-In Box With Removable Protection Cover
• 2 3/4″ – 3 15/16″ Installation depth
• 1/2″ Female Connections

Rough-In For Concealed Installation

Installation Depth 3″ – 4 1/8″

With Shut-Off Valves